Screed Heating Kits

Availability: In Stock

Product Name Price Qty
20mm x 7.5m Roll of galvanized fixing rail
$AUD 20.90
Screed Heat Kit 180W X 10m 0.8A
$AUD 114.40
Screed Heat Kit 360W X 20m 1.5A
$AUD 170.50
Screed Heat Kit 540W X 30m 2.3A
$AUD 207.90
Screed Heat Kit 765W X 42.5m 3.2A
$AUD 266.20
Screed Heat Kit 1080W X 60m 4.5A
$AUD 352.00
Screed Heat Kit 1440W X 80m 6.0A
$AUD 451.00
Screed Heat Kit 1800W X 100m 7.5A
$AUD 544.50
Screed Heat Kit 2160W X 120m 9.0A
$AUD 634.70
Screed Heat Kit 2520W X 140m 10.5A
$AUD 737.00
Screed Heat Kit 2790W X 155m 11.6A
$AUD 808.50
SCK3150: 175m cable, 3150W, 13.1A, 18W/lm², suitable for areas 18.7-21.0m², approx. cost = $45/m²
$AUD 902.00
SCK3600: 200m cable, 3600W, 15.0A, 18W/lm², suitable for areas 21.1-24.0m², approx. cost = $45/m²
$AUD 1,023.00
SCK4050: 225m cable, 4050W, 16.9A, 18W/lm², suitable for areas 24.1-27.0m², approx. cost = $45/m²
$AUD 1,140.70
SCK4500: 250m cable, 4500W, 18.8A, 18W/lm², suitable for areas 27.1-36.0m², approx. cost = $40/m²
$AUD 1,255.10


Thermostats are not included in the kit as there are various options available. Visit the THERMOSTAT page after you have added your kit to the cart or look at the OUR RELATED PRODUCTS tab below and make your selection there


Quick Overview

Screed Heating Kits

FREE SHIPPING Australia Wide when you buy online

15 year warrantyThe Coldbuster screed heater is a bi-directional, single ended 6mm cable and is rated at 14W/m and is supplied as a cable on a roll. To achieve a specific wattage per square meter, secure the cable at the spacing centres recommended for your heating design. Heaters have 2.4m long leads that can be connected to a programmable or manual thermostat control. A range of 14 standard lengths or combination of these lengths caters for all room sizes e.g. from small bathrooms to large living rooms.



FREE SHIPPING Australia Wide when you buy online

Thermostatic comfort control

Complete comfort control is easily achieved with the addition of optional manual or programmable thermostats available through Coldbuster.

Automated operation enhances the energy efficiency of the Coldbuster cable heating system. Programs can be set to regulate comfort levels via floor or room air temperature, up to 4 cycles per day, accommodating different weekday and weekend routines.

Unobtrusive and safe

Coldbuster in-screed cable can be installed directly to concrete reinforcing or secured to a metal ‘fixing rail’ for in-screed application. Coldbuster in-screed cable is suitable for the majority of floor finishes. The heater is waterproof, fully earthed and needs to be connected to a RCD circuit at the time of installation to ensure full protection against fire and shock hazards.

Multi application heating system

Following the recommended layout provided, unroll the heater cable and fix to mesh or rails. Care must be taken to never cross over elements.

The various ways to fix the cable in position include;

In-Screed application - Clip cables on to the metal fixing rails, which are nailed to the slab.
In-Screed on waterproofing - tie cable to reinforcing mesh or secure cable with duct tape. (Metal fixing rails can be used if glued onto the waterproofing)


slab heating installation        

Coldbuster tile heating is classified as an appliance and can be installed by any competent person. The heater must be connected to a RCD (safety switch) protected circuit by an electrician. All wiring must conform to AS/NZS 3000:2000 and local wiring regulations.

Service & support

Coldbuster provide a free design service and planning advice for your complete room heater layout. We are available to answer your questions relating to electrical preparation or installation of your floor heating system. If you prefer to leave the installation to a floor heating contractor, a professional design & installation service is available across Australia.

Robust Screed heating cable 

Coldbuster screed heating cable comes in 8 different lengths. A combination of these lengths caters for all room sizes e.g. from small bathrooms to large halls and acts as the primary or secondary heating source.The screed heating cable features;

  • Bi-directional, single ended 6mm cable is rated at 14W/m and is supplied as a cable on a roll.
  • Factory terminated 2.4 metre 'cold tail' power lead on heater
  • Installation guideline and personalised floorplan layout
  • Technical & installation support (telephonic)
  • Can be supplied as a kit including installation monitor, programmable thermostat and metal fixing rail
Additional Info

Additional Information

Name Screed Heating Kits
Heater Size From 10m to 155m Cable Rolls
Area From (m2) 0.9
Area To (m2) 36.0
Watts No
Amps No
Product Downloads
Our Related Products

Based on your selection, you may be interested in the following items: