<strong>SCK0180: 10m cable, suitable for areas > 0.9m², </strong>180W, 0.8A, 18W/lm², approx. cost = $228.80/m²

RRP $114.40

SKU: SCK0180 Category:

Product Description

Covers a heating area of 0.9m²
Total Output: 180W
Output per m²: 18W/lm
Cost per m²: $228.80m²
Kit Length: 10m ( width 0.5m )

The Coldbuster In Screed Heating cable is suitable for practically any floor finish.

Unobtrusive and safe

Coldbuster in-screed and in-slab cable can be installed directly to concrete re-inforcing or secured to a metal ‘fixing rail’ for in-screed application. Coldbuster in-screed cable is suitable for the majority of floor finishes. The heater is waterproof, fully earthed and needs to be connected to a RCD circuit at the time of installation to ensure full protection against fire and shock hazards.

Service & support

Coldbuster provide a free design service and planning advice for your complete room heater layout. We are available to answer your questions relating to electrical preparation or installation of your floor heating system. If you prefer to leave the installation to a floor heating contractor, a professional design & installation service is available across Australia.

Robust Screed and Slab heating cable

Coldbuster screed heating cable comes in 8 different lenghts. A combination of these lengths caters for all room sizes e.g. from small bathrooms to large halls and acts as the primary or secondary heating source.The screed heating cable features;

  • Bi-directional, single ended 6mm cable is rated at 14W/m and is supplied as a cable on a roll.
  • Factory terminated 2.4 metre ‘cold tail’ power lead on heater
  • Installation guideline and personalised floorplan layout
  • Technical & installation support (telephonic)
  • Can be supplied as a kit including installation monitor, programmable thermostat and metal fixing rail

Additional Information

Weight 1.3 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Pin It on Pinterest