Under tile floor heating arrow Under floor heating kits arrow Under floor heating kit (13mē - 15mē room)




Under floor heating kit (13mē - 15mē room)

... Price: AU$679.00 .....Product Code: 1210W-R

Availability

Usually ships in:

24h.gif
 


:

 


Coldbuster under floor heating features

  • Pre-configured element mounted on self adhesive tape
  • Factory terminated cold tail leads
  • 1mm thin heating element which does not affect floor levels
  • Element & cold tail connections fully earthed & waterproof
  • Durable & reliable
  • Easy floor heating installation, no special tools required
  • 5 Year guarantee

Easy installation process

Coldbuster under floor tile heating can be installed on a suspended timber or concrete subfloor for use under most hard surfaces throughout any home or commercial project.
 

       

       

  • Stick the Coldbuster under floor heater to the floor (floor heating insulation board, tile backer board or concrete) with the self-adhesive tape already positioned on the heater
  • Roll out and stick the self-adhesive fibreglass mesh over the heater
  • Connect the Klimaguard installation monitor to the factory terminated cold tails and you are ready to begin tiling
Coldbuster tile heating is classified as an appliance and can be installed by any competent person. The heater must be connected to a RCD (safety switch) protected circuit by an electrician. All wiring must conform to AS/NZS 3000:2000 and local wiring regulations.

Complete control and efficient energy use

Complete control and efficient energy use is ensured with the standard programmable thermostat supplied with each under floor heating kit.

 

Estimated floor heating running costs for a room using the 1210W tile heater kit (a heated floor area between 13m² up to 15m²) is 7.3c per running hour (based on 15c per kW/h & a duty cycle of 40%).

Coldbuster 1210W kit contents

  • Pre-measured element mounted on self adhesive tape strip heater measures L1150mm x W600mm - average distance of 600mm-700mm from all walls equates to 50-60% of actual floor area
  • Factory terminated cold tail leads on the heater L2400mm
  • Self adhesive fibreglass mesh
  • Programmable thermostat control L125mm x W90mm x D30mm
  • Floor probe sensor L6000mm
  • Klimaguard installation monitor (element alarm/tester)
  • Installation guidelines
  • Technical & installation support (telephonic)
No additional supplies are needed other than bonding supplies normally used when laying a tile floor. We recommend the floor is primed prior to heater being layed.

Call us on 1300 653 914 or buy online now



Under floor heating kit (13mē - 15mē room)

... Price: AU$679.00 .....Product Code: 1210W-R

:

 


You may also be interested in this/these product(s):

6mm Marmox insulation boards - 6sqm
6mm Marmox insulation boards - 6sqm
AU$240.00
Add to Cart
 10mm Marmox insulation boards - 4.5sqm
10mm Marmox insulation boards - 4.5sqm
AU$171.30
Add to Cart