Mirror demister installation

Colduster mirror demister installation

Fitting instructions

Step 1
Remove mirror demister from cardboard packing support

Step 2
Clean back of mirror with a suitable cleaning agent. Surface must be free from oil and dust.

Step 3
Place mirror onto a flat, firm surface with the reflective side down.

Step 4
Remove white paper backing from the mirror demister. Carefully position the mirror demister with the sticky side face the mirror. With the aid of a soft cloth, press and rub the entire area of the mirror demister until the unit is firmly attached to the mirror.

Step 5
This appliance must be connected to a RCD (safety switch) protected electrical circuit by an electrician.